Does the F690 run from the external crystal by default?
Try removing DEFINE OSC 3 and see what happens.
Does the F690 run from the external crystal by default?
Try removing DEFINE OSC 3 and see what happens.
default config line is...
We don't see any config fuse setting here, so this would make some sense...Code:device pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
This is my config line
Code:__config _XT_OSC & _WDT_ON & _MCLRE_ON & _CP_OFF
Rob
Success!!
Okay, same setup. Same code. This time compiling was done with the melabs compiler (instead of mpasm) and downloaded with a pickit2 (instead of an ICD2). I'm going to investigate this more and post my findings.
Rob
Great!!Originally Posted by rborsuk
Are you setting the configs in you code or the inc file?
Dave
Always wear safety glasses while programming.
I was setting them in the 16F690.INC file in the PicBasic Pro (PBP) folder. That's the right spot, correct?
Rob
That is the spot.
The are two sections in that file. One for MELABS and one for MPASAM.
Just wondering if you are modifying the settings for MELAB and not MPASAM?
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks