easyHID question

[mister_e]

I don't know why it happened to you... usually you just comment those line, you save the "INC file .... ET VOILA!

Not much
Rien d'autre à changer
Compile and run
Away you go
Yada yada.

USBDeview is a nice tool to uninstal/remove/monitor your HID devices... handy and free
http://www.nirsoft.net/utils/usb_devices_view.html

[keymuu]

I don't know why it happened to you... usually you just comment those line, you save the "INC file .... ET VOILA!

Not much
Rien d'autre à changer
Compile and run
Away you go
Yada yada.

USBDeview is a nice tool to uninstal/remove/monitor your HID devices... handy and free
http://www.nirsoft.net/utils/usb_devices_view.html

I forgot to say that I found that the B-type USB connector shield was not properly connected to GND. When I noticed that I did connect it as it should be connected. It is kind of funny that the connector, it self is not connected and this leads to that the shield is "floating"?

I have a feeling that fixing that shield connection to GND helped to solve other parts of the USB connection problem. It did of course not have any effect to the compile problems...

I could have tried to delete the file 18F4550.INC before that "read-only" phenomena, but unfortunately I did not try it.
Now of course I can not do that! Maybe good so, but the mystery thing remains, who wrote (or copied from...) it over as long as I got the the error 118 over and over again....

For now:
Darriel, Steve, skimask ... THANK YOU
Thank you very much indeed, thank you all who helped with this many-faceted and persistent problem,...

[mister_e]

Whatever your problem is/was, the most important thing is to solve it, and understand why