GLCD Library for PBP

[rmteo]

They were looking at carrying it so I did a demo for them. Here is a view of the back of the unit.



and some sample code (for Stamp - should be similar for PBP):

SEROUT 1, 396, [85]			' Auto Connect to display at 9600 Baud
					' Can be up to 256,000 Baud

SEROUT 1, 396, [186]		' Clears the screen

SEROUT 1, 396, [188,10,20]		' Position cursor at x10, y20 for text display
	
SEROUT 1, 396, ["Hello World",0]	' Print "Hello World", 0 terminates string

SEROUT 1, 396, [255,3,63,31,25,255]	' Draw a circle at x63, y31
						' Radius of circle is 25 pixels
						' 255 at beginning and end signifies graphics
						' "3" is for circle

SEROUT 1, 396, [255,2,20,10,100,50,255]	' Draw a rectangle from x20,y10 to x100,y50
						' "2" is for rectangle

SEROUT 1, 396, [255,4,30,0,30,60,255]	' Draw a vertical line from x30,y0 to x30,y60
						' "4" is for line

SEROUT 1, 396, [170,185]		' Set brightness level to 185 (from 0-255)
					' "170" is command to set backlight brightness
					' Value stored in EEPROM