Feeling Noobish with 12F683

[picster]

No luck. Adjusted the voltage up a bit, and down a bit. The only byte this seems to be writing is byte 0. Beyond that, it's all blank (03FF). Beats me why it's giving me the error message ABOUT location 0.

Again, other pics (well, my trusty 16F88's) program just fine.

Sent an email to MeLabs - if I get a resolve there, I'll post it in followup.

Steve

[picster]

Well, the MElabs folks suggested that I download the OLD version of the EPIC programmer software, version 2.46, from their website and try that to fix my problem. Lo and behold, it WORKED!!!

So if anyone else is having this issue, programming problems with the parallel EPIC programmer and the 12F683, this seems to be the fix.

picster