Feeling Noobish with 12F683

[mackrackit]

I use the config settings via meProg options, not in the file itself, and have them set as follows:

Oscillator: INTOSCIO
Watchdog Timer: Disabled
PowerUp Timer: Disabled
MCLR Pin Function: Reset
Brown-out Detect: Disabled
Internal External Switchover: Disabled
Fail-Safe Clock Monitor: Disabled
Code: Not Protected
Data EEPROM: Not Protected

Here is what you hex says
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2914&stc=1&d=122429288 4">
Almost matches. I do not have you setup. Is there a way with you programmer to set the fuses from the inc or in the code?

I am just guessing again