Is not a contradict . I write in memory at diversely address and time sequents, and read all address once .Originally Posted by skimask
|
Is not a contradict . I write in memory at diversely address and time sequents, and read all address once .
|
Ok, so if I am to understand this correctly, at the moment, you have:
A PIC
A one-wire temp sensor (model number???)
A 24FC512 serial eeprom
A handful of 5x7 LED matrix display units
An LCD for testing (not to be used in the 'final project')
Correct so far?
|
Don't mean to jump in the middle of everything here, but let me see if I can summarize perhaps what you want to do.
You want to write both "TEXT" and digits to the EEPROM using one (or several) I2CWRITE command; and you want to read them, again, using one I2CREAD command correct?
If this is so, I think you really want to revisit what ARATTI said on post #32. Using the STR, [Str Celsius\32], modifier allows to access a whole string (array) which is what you want to do. Let me note though, that this would be an awfull waste of resources. Storing the numeric value in the EEPROM is good, but all additional processing and characters do not need to be on EEPROM.
|
He did mention in post #35 that he only wants to store/retrieve the temp results only, not the whole string. But I agree, he should re-visit post #32, as well as post #2, #8, #23, and #25.
And now that he has an LCD to play with, should re-visit those posts along with trying different methods of displaying numbers on the LCD to get a good idea on how those commands and/or modifiers actually work. Then build up to displaying the results using those modifiers to a 5x7 LED matrix.
|
languer;64350] Don't mean to jump in the middle of everything here, but let me see if I can summarize perhaps what you want to do.
You want to write both "TEXT" and digits to the EEPROM using one (or several) I2CWRITE command; and you want to read them, again, using one I2CREAD command correct?
I want to write on memory : simple text ,( letters and ciphers) , data for 2 temperature ,( inside and out ), day , month , year , houre , minutes .And in this monent I do not know to convert hexa result from DS1820 to ASCII to can be some as text .
If this is so, I think you really want to revisit what ARATTI said on post #32. Using the STR, [Str Celsius\32], modifier allows to access a whole string (array) which is what you want to do.
Why ? I have a program that work . Do you read it ? I'll try to translate in englesh for easily understand . What you say is to do an other program .
Let me note though, that this would be an awfull waste of resources. Storing the numeric value in the EEPROM is good, but all additional processing and characters do not need to be on EEPROM
Is not true , I must to have all in eeprom to can read together ( in my idea and in program what I use now )
Last edited by Eugeniu; - 18th October 2008 at 22:04.
|
Hi !
Here is some informations about DS 1820 "
TEMPERATURE/DATA RELATIONSHIP Table 2
TEMPERATURE DIGITAL OUTPUT DIGITAL OUTPUT
_______________(Binary)_____________(Hex)
+85.0°C*____ 0000 0000 1010 1010___00AAh
+25.0°C ____ 0000 0000 0011 0010___0032h
+0.5°C______ 0000 0000 0000 0001 __0001h
0°C_________0000 0000 0000 0000___0000h
-0.5°C______1111 1111 1111 1111____FFFFh
-25.0°C_____1111 1111 1100 1110____FFCEh
-55.0°C_____1111 1111 1001 0010____FF92h
only right byte I use , but I must to conver it in decimal . The left byte I use only to put "-" sign when it is = FFh .For right side of comma , I use byte 6 from sensor - COUNT REMAIN- . Tell me how convert right byte in decimal
Last edited by Eugeniu; - 18th October 2008 at 22:01.
|
Might I suggest that you back up in your process just a bit and practice/learn how to convert and display various types of numbers in general before trying to convert and display a result from a temperature sensor.
You don't seem to understand that the references to the earlier posts that we are giving you have the some of the information and answers you need to finish your project, DIG is on of those, if not the only one you'll need to convert your data from the binary format to the ASCII format (along with a bit of simple addition) to send to your display subroutine.
We do not have the hardware you have. We do not have the same 'vision' of the final project that you have, therefore, I think it is relatively unreasonable to ask others to write code FOR you, since that code that is written probably won't work for YOUR particular setup in the end. One thing that DOES work almost everytime though is trying to give a person the building blocks to start somewhere and end up somewhere else...
|
OK ! I ' ll do , be sure . Thank you all , for your help . If have you a new idea , pleace , let me know it .
PS. I have tried all your ideas , and DIG , but they do not work .
|
I have a 7 line X 96 columns leds display , and an other board with LCD display for testing .
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks