Gsm/Gps Tracker

[linoko]

Hi Friends,
The project of Camolas is very interesting and i try to create my own device. This device /schematic is posted below/ is based on the source code of Camolas with little changes on the source code.
My GSM cellphone is Sony_ericsson T630. The phone supports AT+CMGF=1.

The USART settings are:
DEFINE OSC 20
DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
DEFINE HSER_TXSTA 24h ' Enable transmit, BRGH = 1
DEFINE HSER_SPBRG 64 ' 19200 Baud @ 20MHz, 0.16%
DEFINE HSER_CLROERR 1 ' Clear overflow automatically

But i have a problem.
The problem is in Hserin command, i thing that the PIC don't recieve or understand the answer (ok) from cellphone.

for example:
TEST:
HSEROUT["AT",13,10]
HSERIN 10000,TEST,WAIT("OK"), the code hangs here
HSEROUT["ATD0897123456",13,10]
High PortB.0

Please help to solve this....


Thank you

[mackrackit]

This is from Camolas' code

HSERIN 10000,UM,[WAIT("OK")]

Your code

HSERIN 10000,TEST,WAIT("OK"), the code hangs here

See the difference in the syntax.

[linoko]

Hi
I correct my code like Camolas code but the result is same

The problem still persisit
Help Please

[camolas]

Hi
I correct my code like Camolas code but the result is same

The problem still persisit
Help Please

Hi,

Dont forget that im using a nokia serial data cable connected to the phone that have to be powerd on the rs232 end and from the data cable connector (the one that connects with the phone) get tx,rx and gnd.
After this try

Serout2 PortB.6, 84,["AT",13,10] ' 84 is for 9600 Baud Rate see what is yours
Serin2 PortB.7,84, [wait ("ok")]
High PortB.0
Any more hellp let me now.

Xau

[skimask]

The project of Camolas is very interesting and i try to create my own device. This device /schematic is posted below/ is based on the source code of Camolas with little changes on the source code.

I don't see where the original poster actually posted working code...so, I can only infer that any code you may have cut/pasted is also flawed.