Hi,
Distributed Power factor correction (PFC):
http://www.drasa.co.za/news_articles_detail2.html
(From the above link)
If a customer only applies PFC at the utility metering point then a load reduction is only
experienced on the utility’s network and not on the customer’s internal reticulation network.
If however, the PFC is applied at the points where the inductive reactive energy is consumed,
then a loading reduction and consequently also an associated Capex reduction will result on the
customer’s own network. It then follows that the customer will enjoy the same benefit for the
reduction in loading due to the application of PFC as the utility enjoys.
* * *
PFC: (ABB - Asea Brown Boveri )
http://library.abb.com/global/scot/s...with%20PFC.pdf
* * *
Capacitors for Power Factor Correction:
http://www.epcos.com/web/generator/W...locale=en.html
Applications & Cases
http://www.epcos.com/web/generator/W...product=247926
Best regards,
Luciano
Bookmarks