button help

[Archangel]

ok that seems kewl. bt what if i had a high setpoint and a low setpoint and i wanted to use another two buttons, one to access the high setpoint then once the user has entered a value, the user could press the same button to exit and return to the main screen? the same goes for the other button.. im really pulling my hair off with trying to figure this out

<h2> SO WHY SHOULD YOU BE THE ONLY ONE, WITH HAIR ?</h2>
Before you pluck out those last strands . . . Search for Clock examples by Melanie, she details how to use 1 button to do several things . . .

[mackrackit]

Hey Joe,
Have you tried miracle grow?

Kalind,
This might be the thread Joe is referring to.
http://www.picbasic.co.uk/forum/showthread.php?t=3600

If you use it. Read the value of Time and goto where ever from there.

IF Time = 3 THEN ???
IF Time = 9 THEN ?!?!

When that bit of code is ran, set Time back to 0 for the next run.

Oh, and if you have more questions, add a post to the thread, that way people that are working with you get an update in their e-mail. No e-mails for editing. I did not see you added more to the post until Joe replied.

[Archangel]

Hey Joe,
Have you tried miracle grow?

Kalind,
This might be the thread Joe is referring to.
http://www.picbasic.co.uk/forum/showthread.php?t=3600

NOPE ! I was referring to Melanie's Olympic timer. I had hoped Kalind would get busy and search for it. Ambition feeds the helpers. Anyway here is the link to her PDF file . . .http://www.picbasic.co.uk/forum/atta...4&d=1091819883
Look at how She used buttons to do different functions.

[mackrackit]

Ambition feeds the helpers.

Agreed.
I was just trying to give the OP a boost. Get'em through that first project before they become completely lost.

Oh well, we will have to see where it goes from here

[Archangel]

Agreed.
I was just trying to give the OP a boost. Get'em through that first project before they become completely lost.

Oh well, we will have to see where it goes from here

So why does that <b>first</b> project have to be so complicated ?
Nobody fell out of the womb and landed on their feet in a dead run, human beings do not learn that way, we learn in chunks, and fail until we get the gestalt of that chunk, that becomes the cornerstone and we bite off another chunk, It's why some people here constantly ask about blinkys, cause if you cannot do that . . . you're basically screwed. You build a house, 1st Foundation, 2 stemwall, 3 Floor joists,subfloor, Walls, Rafters . . . If you build the roof first, then someone is going to have to help you put it on. In this instance, he would do well to set aside the keypad routine untill he can do with buttons what he wants, make the device work first, then think about how to JAZZ IT UP. Yes you can make a suit out of patches, but would anyone wear it to an interview?

[skimask]

Yes you can make a suit out of patches, but would anyone wear it to an interview?

I would!

[Kalind]

gee, that example is confusing. all i want to use is 5 buttons on port c of my 16f873.

button A = High Setpoint
buttonB = Low Setpoint
buttonC= Increment
buttonD= Decrement
buttonE= Return to main display

At power up of my device, I want my program to prompt the user to enter a high and low setpoint then continue to display the main program afterwards. If the user decides to change setpoint, then the buttons above can be used.