I may be full of you know what...
But I think the LCD is wired backwards. I do not have the data sheet for that one, but isn't pin 14 over by the mounting hole?
|
I may be full of you know what...
But I think the LCD is wired backwards. I do not have the data sheet for that one, but isn't pin 14 over by the mounting hole?
Dave
Always wear safety glasses while programming.
|
Holy Crap!!! Actually, I checked my stash of LCDs. 3 of them have pin 14 by the hole, 1 has pin 1 by the hole...Originally Posted by mackrackit
So I don't think you're full of it...
|
Now if I could get my wife to agree with you
Dave
Always wear safety glasses while programming.
|
Great, after some googling I realized that there are datasheets of very similar displays, and SOME have pin 1 at the edge, and some have pin 14 Doh..
The one that I had printed says it is like I wired it up on the breadboard, therefore I assumed that I followed this when I builded the parport displays, but now I better disassemble one and see how I really connected it.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks