Configuration...again...?

[skimask]

Don't know if it makes a differences or not, but the BOR21V line, you don't have the DEVICE capitalized.
Also, just for grins, try setting it to BOR4V and see what happens...
And just to make sure that you're doing things correctly, try changing a different setting and see if the read back matches your changes...

[Bruce]

@ DEVICE2 BOR21V should get you there.

[Ruben Pena]

Thanks Bruce:
Your last mail works. But is a little weird to have to change the "format" of the device directive. "Omit in the DEVICE2 the PIC name".
By the way, I test the DEVICE with upper and lower chars and always work.
Thanks again and greetings...
Ruben de la Pena V.

[Bruce]

You don't really need a new line for every config directive unless you want to place a
comment on each line explaining what each config statement is.

This works, and saves a boat-load of typing;

@ DEVICE PIC16F886, HS_OSC, PWRT_OFF, PROTECT_ON, WDT_OFF, LVP_OFF
@ DEVICE2 BOR21V

The @ DEVICE2 line doesn't work with or need the target PIC, and placing PIC16F886 on
each new line is just redundant information.

This also works, but why bother typing in the same thing over, and over again?

@ DEVICE PIC16F886, HS_OSC
@ DEVICE HS_OSC, PWRT_OFF
@ DEVICE HS_OSC, PWRT_OFF, PROTECT_ON
@ DEVICE HS_OSC, PWRT_OFF, PROTECT_ON, WDT_OFF
@ DEVICE HS_OSC, PWRT_OFF, PROTECT_ON, WDT_OFF, LVP_OFF
@ DEVICE2 BOR21V