Daves' suggestion of using a fixed resistor is good too. I would replace at least one pot
with a fixed 1%, and if using an A/D input to read this I would drop the pot to around 5K
with the fixed value set to limit total current.
|
Daves' suggestion of using a fixed resistor is good too. I would replace at least one pot
with a fixed 1%, and if using an A/D input to read this I would drop the pot to around 5K
with the fixed value set to limit total current.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks