Servo troubles.

[Glenn]

Hi, Glenn

This one Should run

Well, it kind of works, the servo stands still until I touch the switch, but it moves in very strange ways, I'll try to adjust the values a bit and see if it changes anything.

But it sure looks like the comparators was the problem, great!

[Acetronics2]

Well, it kind of works, the servo stands still until I touch the switch,

Looks it should be in the 1500µs position ...

but it moves in very strange ways, I'll try to adjust the values a bit and see if it changes anything.

should reach slowly one end, then RUN to the other end, then slowly to the other end , Then RUN ...

WHILE pushing a button

and going back to center if buttonS realeased ... or both buttons pushed.

But it sure looks like the comparators was the problem, great!

Alain