Quote Originally Posted by skimask View Post
Decrease the 100 until it starts pausing at one end (meaning the PIC is trying to over-drive the servo) and increase the 200 until it starts pausing at the other end (again, meaning the PIC is trying to over-drive the servo in the other direction).
Well, as you said before the values depends on which servo I use, I settled for the servo that I'm going to use (the brand new china-made) and with that 75 and 255 seem to be the correct values, however, when its 255, its still not at the endpioint, its a few mm more left. ..However this doesnt matter.