Addressing with Dip Switch or ???

Results 1 to 11 of 11

Threaded View

  1. - 15th September 2008, 19:23 #6
    skimask's Avatar
    skimask Guest

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by tazntex View Post
    Good Morning Skimask, thanks for the suggestions, but what are you referring to "short of reprogramming"?
    The other method described above works too...
    Set the units address if/when it's the only unit plugged into the chain, or maybe one of those I/O pin goes to a 'program ID' button.

    Reprogramming as in - programming each unit with it's own recognition code of some sort.

    And while I'm on that, you could use the 3 I/O's for 8 (or 27) different 'addresses', then -reprogram- each 8 (or 27) bunches of units to respond to different addresses...
    Last edited by skimask; - 15th September 2008 at 19:30.
« Previous Thread | Next Thread »

Similar Threads

  1. Rotary Hex Dip Switch Code???
    By dangill in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 13th March 2008, 14:30
  2. DIP switch select delay
    By mongater in forum General
    Replies: 15
    Last Post: - 17th January 2008, 15:13
  3. PIC newbie - took ages to program and i still have bugs
    By Trickae in forum mel PIC BASIC
    Replies: 14
    Last Post: - 26th September 2007, 06:41
  4. dip switchs & inputs
    By grounded in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 19th September 2006, 14:37
  5. Newbie - 16F628A and switch latching
    By malc-c in forum mel PIC BASIC Pro
    Replies: 45
    Last Post: - 19th May 2006, 03:35

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules