|
Sorry...I don't have enough money to buy a power supply with a programmable power on ramp up...Originally Posted by mikeh
Just a clean power supply, decent design, make sure the config bits are set right, try a slower crystal while still using 4xPLL (i.e. 4Mhz xtal gives you 16Mhz, etc)...and so on...
|
18f2320
ok
so how do you know if you have extended or industrial
spec are not clear on this ?
mike
|
The next to the last page of the data sheet tells how to identify the chip.
18Fxxx = normal voltage
18LFxxx= extended voltage
If there is an "I" near the end of the number (I/P) it is industrial.
Dave
Always wear safety glasses while programming.
|
18f2320
thanks for info
i am using 18f2320 (i/sp)
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks