Hi PICante,
You know . . . I'm thinking. . . when you set all that stuff (programs) up in your PC it returns everything to default settings, and then you may or may not go in and rearrange things to your liking, Where am I going with this you say? Maybe your programmer is somehow getting changed from intel hex file output to something else. I think in MCS, under view, program options or whatever it says (I am using my wife's computer so I am telling you this from memory), anyway in there where you change assemblers, there are check boxes which set the assemblers output type, and maybe it is getting it's settings changed.<br>
Edit: on my own computer now. . . Open up MCS, click on the tab marked View, Scroll down the list to "Compile and Program Options" click on this and a window will open, Under the Blue bar labled Compile and Program Options are 3 tabs. Click on the tab marked Programmer. On the lower 1/2 of this tab, right side are 3 check circles, marked as follows INHX8M , INHX85, and finally INHX32. The first one marked INHX8M should be checked.<br> Check this as the source of your problem.
Last edited by Archangel; - 13th September 2008 at 08:02.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
Bookmarks