Quote Originally Posted by Ioannis View Post
One more bug. On the main the first If/Then needs a gosub.
Ahhh, yes it does. Good catch.

Another bug would be the channel selection of A/D module. Since the 883 does not have 5,6 and 7 channel available, it cannot be used as it is the program. Of course it works as is for the bigger cousins 884 and 887.
DOH!

I wish they'd make the datasheets individually. A separate one for each of the 882/883/884/886/887. Instead of jamming a whole series in one sheet so you have to pick out the differences on your own.

OK, there's still more than 8 A/D's in there, I'll have to find a workaround.
Unless you beat me to it.
<br>