Connecting programmer to MicroCode Studio

[Darrel Taylor]

What you need is the "PICKit2 Command Line Interface".

http://ww1.microchip.com/downloads/e...K2CMDv1-12.zip

1 click from Microcode Studio (compile and program).

[mackrackit]

What you need is the "PICKit2 Command Line Interface".

http://ww1.microchip.com/downloads/e...K2CMDv1-12.zip

1 click from Microcode Studio (compile and program).

???
The Auto Import Hex from the PICKIT2 software already does this once the hex is selected.

[Darrel Taylor]

???
The Auto Import Hex from the PICKIT2 software already does this once the hex is selected.

I've never tried it that way.
Perhaps it works fine ...

But I know the Command Line Interface gives one click from MicroCode Studio to PIC.
It's what I use for the PICkit2. I also have an EPIC, and a meLabs U2.

It's been awhile since the installation, I don't remember if it was automatic or if I had to figure it out.
But these are the parameters for the PICkit2 programmer.

-pPIC$target-device$ -f$hex-filename$ -M -R -T -h2

1Hr left this year
Well, In my time zone.

Happy new year!
Kiss someone next to you.

[mackrackit]

I've never tried it that way.
Perhaps it works fine ...

But I know the Command Line Interface gives one click from MicroCode Studio to PIC.
It's what I use for the PICkit2. I also have an EPIC, and a meLabs U2.

It's been awhile since the installation, I don't remember if it was automatic or if I had to figure it out.
But these are the parameters for the PICkit2 programmer.

-pPIC$target-device$ -f$hex-filename$ -M -R -T -h2

When I use windows I just use the PICKIT2 soft ware.
On Linux I use this
http://www.cannasoftware.com/content/view/32/1
Both work well.

1Hr left this year
Well, In my time zone.

Happy new year!
Kiss someone next to you.

I am in the shop by myself, a real party animal
HAPPY NEW YEAR!!!

[tcbcats]

Darrel...
Did this give you the one click flash function from the IDE?
-pPIC$target-device$ -f$hex-filename$ -M -R -T -h2

I tried this and several variants with no luck.
The programmer application starts... no problem... but does not do it's thing without clicking the auto import button.

[Darrel Taylor]

Happy new year!
Kiss someone next to you.

I am in the shop by myself, a real party animal
HAPPY NEW YEAR!!!

Then kiss your DrillPress.
I would if I had one ...
But, right now, the mop looks pretty good too.

tcbcats: Thru my blurry eyes tomorrow, I will attempt to verify the process.
It works, It's sweet.

Hflppy Neflear!

[Darrel Taylor]

Download the latest PICkit2 GUI, and the "PICKit2 Command Line Interface" from Microchip.
http://www.microchip.com/stellent/id...cName=en023805

Extract all files from PK2CMD to your "C:\Program Files\Microchip\PICkit 2 v2" folder.
It's the same folder as the PICkit2 programmer software.

In Microcode Studio View | Compile and Program Options... | programmer tab,
click Add New Programmer, select "Create a custom programmer entry" then click "Next".
Enter any name you wish to call it and click "Next".
Enter pk2cmd.exe as the "Programmer Filename" and click "Next".
Click the "Find Manually" button and point it to C:\Program Files\Microchip\PICkit 2 v2 and click "Next".
Enter this parameter line

-pPIC$target-device$ -f$hex-filename$ -M -R -T -h2

Then click Finished.

Pressing Compile and Program or F10 in MicroCode Studio will now do it all.

<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=3146" /><!-- -->

Descriptions of those, and additional command-line parameters can be found in the "Readme For PK2CMD.txt" file from the .zip above.
<br>