Yes, one 350 will take the load of two 7805s. The pin out is different and you need external resistors to set the voltage of the 350 because it is adjustable, so it is not a direct replacement on a PCB.
|
Yes, one 350 will take the load of two 7805s. The pin out is different and you need external resistors to set the voltage of the 350 because it is adjustable, so it is not a direct replacement on a PCB.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks