Wireless Comunication Dilemma

[Bruce]

See this example http://www.rentron.com/Micro-Bot/IR_Serial.htm

SERIN does not require the WAIT modifier. Just enclose the qualifier in square
brackets. SERIN2 can be used with the WAIT modifier followed by the qualifier
in square brackets.

[jhorsburgh]

Thanks Guys,
I have been looking around at different posts and the internet and i can't find a solution, they all say what i am doing is correct but it does not work. I have attached a copy of the wiring for you guys to look at. The only other thing i can think of in the Baud Rate and the way its driven. Should N1200 work? or should i drive it TRUE?

Thanks Again,
Jeremy

[mackrackit]

Your drawing will not display. Try uploading again.

[jhorsburgh]

does this attachment work better? PS. i forgot to put the external oscillator on the the drawing, but its connected.

Jeremy

[mackrackit]

All I get is this
"The image “http://www.picbasic.co.uk/forum/atta...;d=1220015090” cannot be displayed, because it contains errors."

[ardhuru]

Once you have the basic setup working, I suggest you drive the LED from just the PWM pin (ground the cathode), by controlling the output of the pin as per your data requirement; you will find a significant improvement in range.

Regards,

Anand