HPWM on second half

[Bruce]

Here's an example for the 12F615.

@ DEVICE PIC12F615, MCLR_OFF, IOSCFS_4MHZ, INTRC_OSC_NOCLKOUT, WDT_OFF, BOD_OFF, PROTECT_OFF
    
DEFINE OSC 4
duty VAR WORD

ANSEL   = 0	            ' 12F615 Set all pins to digital
CMCON0 = 0
OPTION_REG = 0          ' Disable internal pullups
WPU = 0                 ' 12F615 Individual pull-ups disabled
VRCON   = 0             ' Internal Vref disabled

    TRISIO = %00111010  ' GPIO.0 = P1B, GPIO.2=P1A outputs
    PR2 = 82            ' Set PWM for approximately 12kHz
    CCP1CON = %10001100 ' PWM mode; P1A active-high; P1B active-high
    T2CON = %00000100   ' %00000110 = TMR2 ON 1:16 prescale
    PWM1CON = %10000001 ' min dead-band time
    
    Duty = 166          ' Roughly 50% duty cycle
    CCP1CON.4 = duty.0
    CCP1CON.5 = duty.1
    CCPR1L = DUTY >> 2
                                
MAIN:
    GOTO  MAIN
    
    End

This has a 1uS dead-band with roughly 12kHz PWM, and each output is the compliment of
the other.