Filter for PWM


Closed Thread
Results 1 to 2 of 2

Thread: Filter for PWM

  1. #1

    Default Filter for PWM

    HI
    I am turning a 5v signal on and off around 700 hz is the max. I need to get a filter going to average out this pulse. The duty cycle will be between 22 and 66. Any ideas as to where I can get info for a starting point?
    Thanks
    Toby

  2. #2
    Join Date
    Oct 2003
    Location
    holland
    Posts
    251


    Did you find this post helpful? Yes | No

    Default

    When you build a low pass rc filter with and RC time of 1/5 th of the freq. the ripple would be very small.
    Your case:
    700Hz = 1,43 msec
    5 x 1,43 = 7,15 msec
    R x C should be about 7,15 msec
    330 nF and 22Kohm gives you 7,26 msec.

Similar Threads

  1. 2nd order Low-pass passive RC filter on PWM
    By munromh in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 29th January 2009, 20:03
  2. Atod Digital Filter
    By GeoJoe in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 2nd April 2008, 18:04
  3. Pic Interference and Power Filter Question
    By Hylan in forum General
    Replies: 3
    Last Post: - 24th January 2008, 08:50
  4. digital filter
    By yasser hassani in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 15th September 2004, 02:28
  5. implementig digital filter and my problems????????
    By yasser hassani in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 2nd June 2004, 19:06

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts