serin with pic18f2525

[J_norrie]

Hi there,

I have tried the code on a 18f2220 but still the same problem. I tried using DEBUGIN but still the same. Is it to do with the settings of the Hardware UART?, I am not actually sending anything to the pic only sending data at present, but it still fails if I include the serin2 line.

anyone out there with any suggestions . I would be eternally grateful

cheers John

[mackrackit]

I am just making a wild guess, maybe PORTC.7 should be set LATC.7.
http://www.picbasic.co.uk/forum/show...57&postcount=9

If I understand this right, LATC will set the pin digital and PORTC is schmitt trigger.

[J_norrie]

thanks Dave, I will give it a try, under pressure at the moment but I will let you know if it worked.

many thanks again
john