Need information about this Motor ?

[mackrackit]

I think skimask is correct.
I will also add the two wires coming out of the end are for speed feed back, a tach of sorts. These normally go to the speed controller. Say you have a conveyor with a variable load. Those two wires is how the controller knows what speed things are running at.

[Archangel]

Yep , that jibes, F = field A= armature DOH !
Field and Armature wired in series, wired for CW and CCW. Sometimes I just overthink some things, what do you suppose the extra 2 wires are for? TACH ?

[skimask]

The O/P said 6 wires for the motor, 2 for brake, so I assume that's 8 wires total.
If that's the case, then yes, I'd say 2 for field, 2 for armature, 2 for tach, 2 for brake.

[Archangel]

The O/P said 6 wires for the motor, 2 for brake, so I assume that's 8 wires total.
If that's the case, then yes, I'd say 2 for field, 2 for armature, 2 for tach, 2 for brake.

Damn!

[skimask]

Nope, 6 from the motor 2 from the brake, zoom in the picture, easy with Firefox and Zoom plugin.

Isn't that what I said?

[mackrackit]

Maybe this is it. Explains the 6 wires from the motor.
From the Baldor web site.

[iugmoh]

thanks for all, the information I talked about are found on a name plate on the motor, there are 6 wires on group and at the end of shaft are two wires for magnetic brake

[Archangel]

Maybe this is it. Explains the 6 wires from the motor.
From the Baldor web site.
Attachment 2806

You're good ! Even looks like a cousin to his schematic.