You pointed to the ICM7212, but I think you'll need the ICM7211M device for an LCD.
It seems pretty straight forward, put the BCD digit on the data inputs, 2 pins select the digit, then stobe the CS line. Takes 7 pins on the PIC.
|
You pointed to the ICM7212, but I think you'll need the ICM7211M device for an LCD.
It seems pretty straight forward, put the BCD digit on the data inputs, 2 pins select the digit, then stobe the CS line. Takes 7 pins on the PIC.
Last edited by Darrel Taylor; - 5th August 2008 at 22:33. Reason: added -removed
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks