Timer problem

Closed Thread
Results 1 to 3 of 3

Thread: Timer problem

Hybrid View

  1. - 31st July 2008, 18:40 #1
    skimask's Avatar
    skimask Guest

    Did you find this post helpful? Yes | No

    Default

    Check your PIC's datasheet. What 'mode' are most pins/ports set to on a power up RESET?
    Then try a 'blinky LED' program...then try to understand YOUR program.
  2. - 31st July 2008, 20:38 #2
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    I taste this : "If time=0 then porta.0 = 0" but not working
    Which PIC are you using?

    Have you set TRISA.0=0 so PORTA.0 is an output?
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
« Previous Thread | Next Thread »

Similar Threads

  1. Elapsed Timer Demo
    By Darrel Taylor in forum Code Examples
    Replies: 111
    Last Post: - 29th October 2012, 18:39
  2. Timer + rc5
    By naga in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 19th November 2009, 08:56
  3. Timer interrupt frequency
    By Samoele in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 18th January 2009, 00:49
  4. Interesting delay problem
    By Kreston in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 1st September 2008, 15:41
  5. Timer problem
    By Kamikaze47 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 21st February 2008, 14:54

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules