Problem using Else

[skimask]

ok, on the transmitting side after stripping everything down I am sending the data for the button that is pressed and when I release each button I send the data again and it clears that particular output on the receiver. Seems to work ok. Thanks for everyones help and I read something here on the forum about closing the post when finished so,... if so how do I do that?

Well, what I'm trying to do is show you a much better way of doing things, one that's much much easier to read thru and takes up a lot less code space, by breaking it down, and building it back up again.

Closing - I wouldn't worry about it. I think I've only ever seen a handful of threads that are closed here.

[tazntex]

Thanks Skimask and everyone else who has helped me. I appreciate you trying to teach me by giving pointers, but this has been a rough one I am by no means a quitter, thought about it though, especially through the last couple of post. I am laughing now. Everything seems fine. I can pressed the button now portb 1-4 are momentary and stay on as long as I am pressing then go off when I release them. Every once in awhile one will stay on and I'll press the button and release it and that output will clear. Thanks again to all