Quote Originally Posted by mackrackit View Post
Take a look at this:
http://www.picbasic.co.uk/forum/showthread.php?t=7700
I think it is the same firmware, I get confused with FTDI's numbers and such. Just about as bad as their documentation.
I've read the documentation from http://www.picbasic.co.uk/forum/showthread.php?t=7700 before posting here a new thread...I've verified the problems with RTS and CTS but there are all correctly set and I send a CR after each command ...the module it's communicating with the USB stick...because the led of the USB stick it's blinking when I run the code, and as I post previously a simply test of sending a CR and verifying the answer(D:\) confirm that the USB stick it's present and the synchronization messages are working too (I've tried also command in ECS mode and it's working) . I don't know why I cannot set the module in short command mode (SCS) and always returns Bad Command. I will appreciate if anyone has any ideas what I have to do or what it's the problem with the module. Thanks!