18F252 config

[mpardinho]

i need change my config because 18F2520 finish in my city....then i but 18F252 and
i have problem with config

code/pic work with 8 mhz internal oscilator with pll = 32mhz

Code work 100%

   asm   
      __CONFIG    _CONFIG1H, _OSC_INTIO7_1H & _IESO_OFF_1H
      __CONFIG    _CONFIG2H, _WDT_OFF_2H & _WDTPS_512_2H
      __CONFIG    _CONFIG3H, _PBADEN_OFF_3H
      __CONFIG    _CONFIG4L, _LVP_OFF_4L & _XINST_OFF_4L
      __CONFIG    _CONFIG5L, _CP0_ON_5L & _CP1_ON_5L & _CP2_ON_5L & _CP3_ON_5L
      __CONFIG    _CONFIG5H, _CPB_ON_5H
   endasm

   DEFINE   HSER_RCSTA    90h
   DEFINE   HSER_TXSTA    20h
   DEFINE   HSER_BAUD     9600
   DEFINE   HSER_CLROERR  1

'-------------------------------------------------------------------------------
   Led               var   PORTC.4
      
'-------------------------------------------------------------------------------   

   I                 Var   WORD
   J                 Var   BYTE
	
'-------------------------------------------------------------------------------	
Boot:
   
   DEFINE OSC 32
   
   OSCCON = %11110000                           ' 8 Mhz, internal osc
   OSCTUNE = %11000000                          ' 4x PLL enabled

   CMCON = 7
   ADCON1 = 15                                  ' Port A digital
   INTCON2.7 = 0                                ' Ativa Pull-Ups
   
   LATA = 0
   LATB = 0
   
   PORTA = 0
   TRISA = %00000000

   PORTB = 0
   TRISB = %10101110
   
   PORTC = 0
   TRISC = %10000000

   Led = 1
   pause 2000   
         
   hSEROUT ["-"]
   PAUSE 1   
   hSEROUT ["START", 13, 10]
   pause 1
     
   Led = 0

   i = 0
Loop:
   Hserout[65 + I, 13]
Goto Loop

i try....not work

   asm      
***
i try .....
      .. __CONFIG    _CONFIG1H, _HS_OSC_1H
      .. __CONFIG    _CONFIG1H, _HSPLL_OSC_1H
      .. __CONFIG    _CONFIG1H, _RC_OSC_1H
      .. __CONFIG    _CONFIG1H, _OSCS_ON_1H & _RC_OSC_1H
      .. __CONFIG    _CONFIG1H, _OSCS_OFF_1H & _HS_OSC_1H
      .. __CONFIG    _CONFIG1H, _RCIO_OSC_1H
***     

      __CONFIG    _CONFIG2H, _WDT_OFF_2H & _WDTPS_128_2H
      __CONFIG    _CONFIG4L, _LVP_OFF_4L
      __CONFIG    _CONFIG5L, _CP0_ON_5L & _CP1_ON_5L & _CP2_ON_5L & _CP3_ON_5L
      __CONFIG    _CONFIG5H, _CPB_ON_5H
   endasm

   DEFINE   HSER_RCSTA    90h
   DEFINE   HSER_TXSTA    20h
   DEFINE   HSER_BAUD     9600
   DEFINE   HSER_CLROERR  1

'-------------------------------------------------------------------------------
   Led               var   PORTC.4
      
'-------------------------------------------------------------------------------   

   I                 Var   WORD
   J                 Var   BYTE
	
'-------------------------------------------------------------------------------	
Boot:
   
   DEFINE OSC 32
   
   OSCCON = %11110000                           ' 8 Mhz, internal osc
   '-- disable in 252 OSCTUNE = %11000000                          ' 4x PLL enabled

   '-- disable in 252 CMCON = 7
   ADCON1 = 15                                  ' Port A digital
   INTCON2.7 = 0                                ' Ativa Pull-Ups
   
   LATA = 0
   LATB = 0
   
   PORTA = 0
   TRISA = %00000000

   PORTB = 0
   TRISB = %10101110
   
   PORTC = 0
   TRISC = %10000000

   Led = 1
   pause 2000   
         
   hSEROUT ["-"]
   PAUSE 1   
   hSEROUT ["START", 13, 10]
   pause 1
     
   Led = 0

   i = 0
Loop:
   Hserout[65 + I, 13]
Goto Loop