MPLAB IDE (NewBee)

Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. - 16th August 2009, 15:24 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink Considering you want PBP as a Compiler ...

    Hi,

    After having tested it ...

    I think, for a beginner, that PBP + MCS + EasyPic5 really is worth its value ... as EasyPic5 can be used as a programmer by MCS ... and is one of the best " testBoards " on the market.
    Also note plentiful of easy to connect modules for experimenting with Peripherals ...


    Using MPLAB is, to me, a second step when a look at asm produced code begins to be helpful. ... and if you want to use ICSP or the Powerful Microchip debuggers ( Pickit 2/3 and ICD 2/3 )

    But ... it's no more for the beginner !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 17th August 2009, 20:43 #2
    elproducts's Avatar
    elproducts
    elproducts is offline Junior Member
    Join Date
    Jun 2004
    Location
    Michigan
    Posts
    8

    Did you find this post helpful? Yes | No

    Default EasyPIC 5

    Is there a command line to set up EasyPIC 5 in MCS?
    If yes, what is the command line?

    Or do you just load the .hex separately in the EasyPIC 5 interface?
    Chuck Hellebuyck
    Electronic Products
    http://www.elproducts.com
    [email protected]
« Previous Thread | Next Thread »

Similar Threads

  1. anyone who ones to give code for DMX transmission using PIC16f690 with MPLAB IDE
    By vimson in forum mel PIC BASIC
    Replies: 0
    Last Post: - 13th February 2009, 03:34
  2. Upgraded to MPLAB IDE 8.14 and now I'm stuck
    By BlueHairBob in forum General
    Replies: 2
    Last Post: - 20th August 2008, 01:15
  3. PBP and MPLab IDE
    By Perrin` in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 29th May 2008, 14:09
  4. Using PICBASIC PRO in MPLAB IDE
    By jblackann in forum General
    Replies: 8
    Last Post: - 4th May 2008, 09:20
  5. "Program Memory Error" with MPLAB IDE (PBP)
    By aggie007 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 13th November 2007, 19:27

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules