serial trouble

Results 1 to 8 of 8

Thread: serial trouble

Threaded View

  1. - 23rd November 2004, 03:04 #7
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    not sure but if you declare
    TRISC = %10000000 'Set PORTC to all output except #7
    PORTC = %00000000 'Set all outputs to 0 (off)


    PORTC=%00000000
    will make PORTC.7 as output.... not sure of this. Try to remove PORTC= line.

    if data if wacked, maybe because of the Timeout label.

    regards
    Last edited by mister_e; - 23rd November 2004 at 03:11.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. MCSPlus serial interface to EasyPIC6 not working?
    By jellis00 in forum Serial
    Replies: 33
    Last Post: - 19th March 2010, 04:02
  2. Dynamic USB Serial Number (PIC18F4550)
    By awmt102 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 16th July 2009, 18:03
  3. PIC18F4680 to PC via MAX232 (RS232 serial) no output
    By opticsteam1 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 14th April 2008, 21:39
  4. interfacing to the pc serial port
    By kelangfei in forum General
    Replies: 4
    Last Post: - 7th October 2007, 23:35
  5. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 04:46

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules