Siemens c55 sms control help please

[skimask]

And you've just answered your own question and/or fixed your own...if you knew where to look for it...or if you could see the forest through the trees.
Where are you filling myvar and where are you getting the last OK? And when are you going to reorder your code to match what you want?

[camolas]

Hi ,

Big mess please give me some hellp

[skimask]

Hi,
The HSEROUT["at+cpms=",34,"SM",34,13] is to change the momory of the cell phone and phone send back comfirmaction on the change +CPMS: 1,15,1,15,1,15
OK
The HSERIN 2000,IP,[WAIT("OK")] is to for the above ok and then goto next step
The IP: HSEROUT["AT+CMGR=1",13,10] is the next step and reads the pdu sms phone send back the comfirmaction AT+CMGR=1
+CMGR: 1,,23
0791539126010000240C915391663921010000807070819341 400453FA1B0E (my message)
OK (the ok by the phone)
HSERIN 2000,LI,[WAIT("OK")] whaits for the above ok and goto
LI:
HSERIN 2000,POR,[WAIT("OK"),STR myarray\62]
here i have some ??? because i dont have a ok input from the cell phone
Then if myrray zero posiction are zero like its in pda array next goto so sucess if not goto lop
POR:
if myarray[0]="0"then
'pdu sms in the phone 0791539126010000240C915391663921010000807070819341 400453FA1B0E
goto success
endif
goto LOOP
success:
High PortD.2
End

Hi ,
Big mess please give me some hellp

Anything yet? Do you understand the format of the HSERIN command? The time-out, the WAIT, the rest?

[camolas]

Hi,

Nothing me head is exploding.......... i put HSERIN [STR myarray\62] and nothing ...........


Thanks for STILL caring

[skimask]

Hi,
Nothing me head is exploding.......... i put HSERIN [STR myarray\62] and nothing ...........
Thanks for STILL caring

AND your code is flawed because the timeouts in the HSERIN, I believe, are used incorrectly in this case.
Think about it...
What direction does the code go if you don't receive the OK?
What direction does the code go if you DO receive the OK?

[camolas]

Hi,

In this case the with the HSERIN [STR myarray\62] i send this (only 1 time it stop looping)

at+cpms="SM"
+CPMS: 1,15,1,15,1,15

OK
AT+CMGR=1
+CMGR: 1,,23
0791539126010000240C915391663921010000807070819341 400453FA1B0E

OK
What time out shell i put? i have tryed 500,1000,2000,5000
on 1st Hserin to IP and the secund to LI

Can you please put me the good command line? please.....

AND your code is flawed because the timeouts in the HSERIN, I believe, are used incorrectly in this case.
Think about it...
What direction does the code go if you don't receive the OK?
What direction does the code go if you DO receive the OK?

[skimask]

Can you please put me the good command line? please.....

LOOK AT YOUR CODE!!! READ YOUR CODE!!!
Have you looked at your code lately? Have you read it?
Are you just assuming it will work because you wish it to be true?

LOOP:................
HSERIN 2000,IP,[WAIT("OK")]

If this line times out, where does the flow of the code go?
If this line doesn't time out, where does the flow of the code go?

IP:..................
HSERIN 2000,LI,[WAIT("OK")]

If this line times out, where does the flow of the code go?
If this line doesn't time out, where does the flow of the code go?

LI: 
HSERIN 2000,POR,[WAIT("OK"),STR myarray\62]

If this line times out, where does the flow of the code go?
If this line doesn't time out, where does the flow of the code go?
And what is the phone going to send first? The OK or the string you wish to put in the array?


I'm out....
http://en.wikipedia.org/wiki/What_we...to_communicate

[Archangel]

Zero BYTE ARRAY ? Is that right? Seems like an Array of "no" bytes . . . seems to me, a standard byte var is an array of 1, MyVarArray[1] or MyVarArray var BYTE . . . did I miss something here ?

[camolas]

Hi,

The array is [62] byte the 0 byte in the array is 0 as you can see here "0791539126010000240C91539166392101000080707081934 1400453FA1B0E"

by

Zero BYTE ARRAY ? Is that right? Seems like an Array of "no" bytes . . . seems to me, a standard byte var is an array of 1, MyVarArray[1] or MyVarArray var BYTE . . . did I miss something here ?

[skimask]

Zero BYTE ARRAY ? Is that right? Seems like an Array of "no" bytes . . . seems to me, a standard byte var is an array of 1, MyVarArray[1] or MyVarArray var BYTE . . . did I miss something here ?

Yep! It's just referencing the first byte of the array, not a one byte array (which could just be nothing more than an 8 BIT array )
At least THAT part of the program is done correctly.