How do you
Is the output from the DCF time signal the same as the MSF one?
I.E will software (PBP) written for a DCF receiver work when attached to an MSF receiver?
By the way the original text of this post was how do you edit posts when there is no edit button, but for some wierd reason there is an edit button on some of my posts but not all
Last edited by lew247; - 2nd June 2008 at 17:32.
|
I keep wondering if it is possible in the forum software to block the same poster from posting in multiple sub-topics within a span of an hour. There seems to be a regular flood of spam postings every now and then
|
What has that got to do with the question I asked? or are you accusing me of multiple postings in multiple sub topics?Originally Posted by Jerson
Yes I had asked a question yesterday about how to interface an msf module to a pic but seeing nobody wanted to answer, I made the question simpler by asking is the data transmitted by both signals the same, i.e you'd use the same program to decode them and they contain the same info in the same format
My post title says.. how do you and the original post was actually asking how do you edit posts as there was NO edit button on the question i asked yesterday... but there was an edit button on this one
hence me changing the question here
if that made sense to anyone!
|
No...It had nothing to do with you!!!! Don't take it wrong!!!!
There was a spammer on here earlier that posted a bunch of crap...happens once in awhile.
Apparently the admins got in and deleted them and there's a bit of miscommunication...
And the edit button should be present AFTER you post...but it does go away after a bit.
|
Ah thanks
That explains why the edit button is there on this post but not on the previous one, which would have been handy but such is life
|
Lew247
I hope you understand now that Ski has clarified. There are annoying spammers polluting the board with deals for Hacked phones and stuff. It was not directed at you. I'm sorry you did not notice the spam and felt that it was directed at you.
|
Anyone any ideas how to, or clues as to where i go to start figuring out..
how to decode the data coming from my module, it outputs its own serial data and it uses a 1khz sinc pulse, aparently as it arrives serially I have to shift the bits into 4 bit nibbles, whatever they are! and then convert some bits from bcd and some from hex but that bit shouldnt be a problem, its how to interface the serial output from the module to the pic, and how I'd use the serial data to decode it
sorry this is all probably really easy and simple to most of you but to me it's all new.
|
Is this asynchronous data? You need to know the baud rate in that case. If it is synchronous data, you could look at the SHIFTIN command. You need a clock line and data line for this to work.
|
Its umm not sure really
all I know is what i got off the dats sheet which for a newcomer like me isnt much
if anyone wants to look at the sheet its http://www.u-t-s.de/PDF_Daten/583374...cification.pdf
|
I've looked at the datasheet you linked. You will need to use the SHIFTIN command to capture this data.
|
Thanks
although I've decided to give up totally on trying to figure out pic chips, see my question where I asked the simple query about how you connect one to an icd2
|
Yep, that'll get your project done. Especially when given the simple answers in another thread.
And that datasheet is missing a few key specifications...
Is the serial output clocked by the clock itself (master) or does the clock require a clock (slave)?
Methinks quite a bit easier to go with a dedicated RTC.
|
Hmm ... possible pussy cat
I wouldn't worry too much about those spammers trying to off load stolen goods -- I'll have them all in jail by next Christmas.
|
You go get 'em Tiger!
You're thhhhooooper...
|
Nah, too tough for me, I'm actually really seeking a sedate, peaceful life. Most of these guys on the front line are tougher than the people that they put in jail. Some of them look like they've just come out of a bloody war. I honestly don't think you could pay them enough money. Everyday they're taking a massive gamble with their own lives with everything that they do. No thanks.
Trent Jackson
|
I'd imagine that there's quite a few people around that have me figured as some sort expert at picking people, you're right, I am. There is absolutely no University unit or textbook in this world that will enable you to directly transverse with this skill. I have always been street smart.
Trent Jackson
|
Yep, that's exactly how I pegged you...not to mention an expert at so many wonderful things.
Maybe, just maybe, since after all you are an expert, you could write that textbook that you eluded to, or create that University unit, and even include a full chapter on the art of being street smart, and otherwise, for all to see, and spread that glory which is you.
|
lol, everyone say "meow" to Jeremy.
|
Don't think it's possible. I think becoming street smart comes with being at the center of real world events. Many people are pretty well street smart by the time they're 30. Particularly people in business. I believe that some people are actually even born street smart, much like some Doctors believe that we were all born with language.
|
Everybody say ZZZZZZZZZZzzzzzzzzzzzz to TJ...
(of course we may need some sort of "audio magnificator" and/or long distance communications device to get the vocal information passed up that high)
|
I have a dream...
That one day T Jackson would get down of it's pedestal,
And post something that is PBP related.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I don't think I would classify that as a dream...
A nightmare for sure !
|
I've always been a Martin Luther King Jr speech fan.. hence the "I have a dream" quote
Allow me to dream... everybody have a second, third... hundredth chance
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Did you actually decide to hang it up?
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks