well,
data on 1307 is hex so.......
SEROUT2 PORTA.0,6,1,[ "_T" ,HEX RTC[6],"/",HEX2 RTC[5],"/20",_
HEX2 RTC[7]," , ",HEX RTC[3],":",HEX2 RTC[2],":",HEX2 RTC[1]," ",RTC[9],"M _" ]
( use your own port etc.)
the voltage on SCL & SDA (to gnd) has to be +5 at rest, no signal . Thats what the 10k resisters do.
also, you can check square wave out at 1 HZ with led/resister on the output pin of 1307 as visual check of rtc.
I2CWRITE SDA,SCL,RTCADW,7,%00010000 'TURN ON SQU WAVE OUT to...1... HZ
Bookmarks