Push button on PIC16F887

[skimask]

I have the PICkit 2 express debug
I'm having problems with getting the push button switch.
Can someone post a code for getting the button pressed?

Thanks.

There is code for that type of thing right on the CD that came with the package; ready made; ready to be sent directly to the board.

Code to press button:
1) Note position of hand.
2) Hold hand in mid air.
3) Extend one finger.
4) Aim for button on PICKit2 Express circuit board.
5) Close distance between finger tip and button on PICKit2 Express circuit board.
6) Continue to close distance until contact is made between fingertip and aforementioned circuit board.
7) After contact is made, depress said button.
8) Continue to depress button until decision is made to release button.
9) Upon release decision, retract said fingertip until contact is no longer maintained.
10) Further position fingertip to a comfortable distance from button.
11) Retract one finger.
12 ) Replace hand to position noted in step 1.

That should just about do it.
Did I forget anything?