Do you have MCS set up to us MPASM? Should not make a difference with you PIC though.
The machine I tested your code on does not have MCS. I used MPLAB.
What version of PIC BASIC PRO and MCS do you have?
|
Do you have MCS set up to us MPASM? Should not make a difference with you PIC though.
The machine I tested your code on does not have MCS. I used MPLAB.
What version of PIC BASIC PRO and MCS do you have?
Dave
Always wear safety glasses while programming.
|
Pic16F877 failure to assemble
I am only using MCS 3.0.0.5 as standalone , and PICBasicPro 2.45A. I do have Mplab V8.0 onboard but they no longer include the ability to compile from basic , and will only work with the *.asm file. If this programme compiles on your system , then it should compile on mine , unless I have a dodgy software loading.. I am about to remove PicBasicPro and MCS and reload them both.. I will post the results , most probably Monday....Thanks...Rod.
|
This tells how to use PIC BASIC and MPLAB together.
http://www.melabs.com/support/mplab.htm
Works very well. I even use this on my Linux box.
Dave
Always wear safety glasses while programming.
|
Pic16F877 failure to assemble
I am happy to announce that , after replacing the HDD in my desktop and reloading both MPLAB and PicBasicPro that I am up and running with my 16F877 compilations..anndd PBPro
is running within MPLAB..
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks