LED Machine Tach For Tired Eyes

Results 1 to 34 of 34

Threaded View

  1. - 8th February 2009, 22:16 #23
    Sam's Avatar
    Sam
    Sam is offline Junior Member
    Join Date
    Mar 2004
    Posts
    92

    Did you find this post helpful? Yes | No

    Default

    Hi Joe,

    I must be doing something wrong. I mounted the magnet to the spindle of my mill which on high should be spinning about 2400 rpm. The display is reading anywhere from 250 to 1010 and constantly fluctuating. This is with displays=displays*10. When programmed with displays=displays*60 it's varying from 3000 to over 5000 and again, constantly fluctuating.

    I'm using a 10mhz xtal and have the code set at 10mhz OSC too. Could this be causing a problem ? I'm trying to figure it all out on my own but I'm not getting it, "obviously".
    Last edited by Sam; - 9th February 2009 at 01:36.
« Previous Thread | Next Thread »

Similar Threads

  1. Conway's Game Of Life
    By wellyboot in forum mel PIC BASIC Pro
    Replies: 45
    Last Post: - 28th May 2020, 06:14
  2. Free Project - 245 LED Display
    By T.Jackson in forum Code Examples
    Replies: 221
    Last Post: - 16th August 2009, 04:59
  3. new and need help
    By smeghead in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 3rd November 2008, 20:19
  4. LCD will not start
    By btaylor in forum mel PIC BASIC Pro
    Replies: 49
    Last Post: - 24th May 2007, 02:30
  5. LED Tach Sources?
    By Netjammer in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 17th October 2004, 03:47

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules