16f877a help

[oreo]

at least im not a jerk!!

[sonicm]

at least im not a jerk!!

you can read picbasic manual and check your syntax is correct? one by one

like
-main() in picbasic don't have
-TRISA4 should be TRISA.4


try to read picbasic manaual you should start from there.

[skimask]

at least im not a jerk!!

Maybe...maybe not...
But my eyes work fine. Have you checked the focus on your monitor lately? Maybe that's why you didn't see the numerous references to PicBasicPro. It could happen...

And sonicm is 100% right. Every one of those commands/statements/lines is easily converted to something usable with the PicBasicPro compiler...assuming one has the correct reference material and/or knowledge.

[Bruce]

A wild guess on my part, but looking at your config statement, I'm guessing that you're
using the Hi-Tech PIC C compiler?

Hi-Tech has a web forum. I'm sure if you signup there someone will be happy to help you get
going, but you definitely will want to review the 877A data sheet.

You'll need to disable A/D to use some pins as digital I/O, and RA4 is an open-drain type
output.