|
Is this C or PicBasicPro? Hello!!!
Let's see...
I don't think the bulk of the above code will compile using MeLabs PICBASIC PRO, like the writing at the top of the page specifies these forums are generally for.
I could be wrong...
Please tell me if I'm wrong...
I don't like to be wrong...
I don't mind being wrong...
But I still don't like it...
I guess you were fetching a stick from the oven...
Last edited by skimask; - 17th June 2008 at 14:01.
|
at least im not a jerk!!
|
you can read picbasic manual and check your syntax is correct? one by oneOriginally Posted by oreo
like
-main() in picbasic don't have
-TRISA4 should be TRISA.4
try to read picbasic manaual you should start from there.
|
Maybe...maybe not...
But my eyes work fine. Have you checked the focus on your monitor lately? Maybe that's why you didn't see the numerous references to PicBasicPro. It could happen...
And sonicm is 100% right. Every one of those commands/statements/lines is easily converted to something usable with the PicBasicPro compiler...assuming one has the correct reference material and/or knowledge.
|
A wild guess on my part, but looking at your config statement, I'm guessing that you're
using the Hi-Tech PIC C compiler?
Hi-Tech has a web forum. I'm sure if you signup there someone will be happy to help you get
going, but you definitely will want to review the 877A data sheet.
You'll need to disable A/D to use some pins as digital I/O, and RA4 is an open-drain type
output.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks