Hey LetTheSmokeOut,
I'm still pretty newbie to this stuff, but I had 2 issues that drove me nuts for a while that you never kbnow, could be one of your problems. One was that, for some reason, no matter how many times I read the PBP manual for the LCDOUT command, my mind never saw the "Flags = 0" part. Some one here pointed that out to me and that fixed one issue. The other issue was that I was getting garbage displayed sometimes and I could not display a number ending in "0" or "P". It turns out that the voltage rating fro the LCD was a minimum of 4.7 V and with the resistor I was using, it was about 4.62 or so. I changed that resistor to get the voltage up in range and that solve my bizarre problems.
Gary
Bookmarks