Wanted: Sound chip interfaced with pic

[skimask]

I need to add loud and *good* quality/realistic gunshot sound to my lasergame equipment project. i have implemented all features but the sound. using a Cracker is lame and unsafe but digital sound often sounds crappy and lame too!

Looks in the manual for SOUND. You want white noise to make that sort of sound.
Worst case you end up with a dedicated, pin triggered PIC (might even run on a 10F200) making sound connected to an amplifier.

[xnihilo]

Looks in the manual for SOUND. You want white noise to make that sort of sound.
Worst case you end up with a dedicated, pin triggered PIC (might even run on a 10F200) making sound connected to an amplifier.

no. white noise sucks.
i need good quality audio chip.
there is somrting called quickvoice...

[skimask]

no. white noise sucks.
i need good quality audio chip.
there is somrting called quickvoice...

Gunshot noise IS white noise! It's all in how you manipulate the envelope.

whatever...

[tenaja]

But it is a laser gunshot...those are typically more melodious than white noise.

[skimask]

But it is a laser gunshot...those are typically more melodious than white noise.

Yep, I smell what you're cooking. All that 'white' noise from the SOUND command has a LOAD of harmonics in it being square waves and all. Could probably roll that pitch value up and down fairly nicely to get that sort of sound.

[PJALM]

If you do it right you can even use the internal DAC to generate just about any sound.

[skimask]

If you do it right you can even use the internal DAC to generate just about any sound.

Internal DAC? Which PIC has one of those?