Hey Dave,
I plan on using IR in the future but for the moment i would like to get the RF working, the RS232 portion of the reciever is also something i would like to play with so the code you have posted is a perfect start.
Thanks again,
Jeremy
|
Hey Dave,
I plan on using IR in the future but for the moment i would like to get the RF working, the RS232 portion of the reciever is also something i would like to play with so the code you have posted is a perfect start.
Thanks again,
Jeremy
|
The primary differences for IR are that you need to modulate the transmitter with the IR carrier frequency (usually 36-40kHz) and IR receivers are active low whereas RF receivers are active high. If you wander about my website you'll find a few schematics that may help. You can find more specific schematics on Bruce Reynols website...Make sure that you are using the latest version of Code Studio. I believe the sample code was written for use with MPASM. If you want to use the meLabs PM assembler, you need to change the fuse config settings - there's a thread here that details the different syntaxes...
Last edited by dhouston; - 10th June 2008 at 14:58.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks