Pulse Decoding

Results 1 to 13 of 13

Thread: Pulse Decoding

Threaded View

  1. - 2nd June 2008, 21:31 #13
    Freman's Avatar
    Freman
    Freman is offline Junior Member
    Join Date
    May 2008
    Posts
    46

    Did you find this post helpful? Yes | No

    Default

    I'll add that check tonight dhouston.

    I went with 0 instead of 1 because it gave me a much tighter average long pulse.
    Almost all the long pulses were comming in qt 2355 exactly, I only added a little bit of deviation after adding the loop code.

    To be honest I didn't do the math behind the short pulses, only the super massive long pulse so I will sit down and do the math to make it more accurate.

    Now that the 'easy' stuff is done tho... I have to work on replicating their method for reading the input buttons as described here: http://picbasic.co.uk/forum/showthread.php?p=56697
    Last edited by Freman; - 2nd June 2008 at 23:47.
« Previous Thread | Next Thread »

Similar Threads

  1. Pulse Capture and byte building
    By boroko in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 21st July 2009, 01:59
  2. Single digit 7 Seg LED clock - PIC16F88
    By thirsty in forum Code Examples
    Replies: 4
    Last Post: - 17th July 2009, 08:42
  3. Incoming Pulse Monitoring code - comments and suggestions welcome
    By jamie_s in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 13th September 2008, 17:40
  4. Decoding an incoming infrared signal: need advice
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 9th May 2008, 16:28
  5. Pulse Frequency Multiplication
    By jamie_s in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 21st August 2005, 10:39

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules