First of all i had the code error where the example was missing (wx=(wy< Next <<<<---------) after replacing this with the example above it seems that code execution halts on waiting for initalisation command(data pulled low) and nothing will happen untill i manualy ground the pin temproraly oncei do this it outputs repeating numbers in an unordly fashion
i am using picbasic pro 2.44 but can also code in assembly the selected mcu is a pic16f628 a running at 4mhz internal osc
Would greatly appreciate any help you could provide i had a look at the bs2 code you pointed out and will try to convert it to picbasic