Now that's what I'm screamin... Thanks Mister E. This is all running in an IF/THEN loop.
So to recap... My syntax should look like this:

PORTB.6 = PORTA.2 & PORTB.2 ?

And judging from what I read; At 20MHZ, this thing should keep up with a PWM frequency of 3000 with no problem? That makes sense considering the PWM is hardware driven.

Mister E = my hero.

Thanks for your help too Mel.
And everyone else for contributing.
I hope this thread helps someone else that might want to multiplex the two PWM outputs to general purpose outputs.

Bron...