Pic Development Board

[jcleaver]

just must be my math but device is higher in cost us$ and higher in shipping

have used easypic and mikroe for over 2 years good product also have pbp which
has better tutorial but drives me crazy with all the efforts to config a pic


mikroe is much easier to use for a beginner and great examples


just my 2c us$

[f_lez]

just must be my math but device is higher in cost us$ and higher in shipping

have used easypic and mikroe for over 2 years good product also have pbp which
has better tutorial but drives me crazy with all the efforts to config a pic


mikroe is much easier to use for a beginner and great examples


just my 2c us$

depends were you are on post/packing/tax's, i got a bag of pics, a 2 line lcd, a 4 line lcd, a colour lcd, stepper motor, temp sensor, cd of possibly buggy programmer software, 100 quid .


mikro, looked at it, looked for a pdf with syntax for each command, as these things are never exactly the same between languages, did not find one, while pbp has an extensive lookup in pdf and online, so i like.

[f_lez]

UPDATE **********


I have not translated..

Hello,Cannot sir, no CMD function in *.exe %filename %device


I take that as the programmer software does not support commandline switches.



update 2 ****

Fuses, ok for some reason the programmer has 4 ways to program, you can use the 'program' dropdown, or click the colourful program button, or to the right you can click the gray program button, and down near fuse selection is another program button, yes thats 4, well one thing for sure, not all program buttons maked 'program' are created equal, as only 1 of them actually programs the chip fully.............