Help please with i/p o/p hold delay

[skimask]

What is the minimum duration of these input pulses that will be doing the latching and resetting?

[g7jiq]

Hi,
The input pulses are actualy toggled inputs,
The input can be anything from 1 second to several mins.

The pic circuit is actualy going to be used in a low power radio link,
and its to control the transmit delay to stop it from chattering.


Cheers
Dave..

[skimask]

The input pulses are actualy toggled inputs,
The input can be anything from 1 second to several mins.
The pic circuit is actualy going to be used in a low power radio link,
and its to control the transmit delay to stop it from chattering.

If the input is slow like that, then your program is practically written by the wording in your first post...

[g7jiq]

I have grasped the basics,
but when it comes to timing loops I am beat.

I have only been into pic programming for just over a year,
and are learning fast.

Half the problem is knowing where to start,

If you possibly could draft out a bit of program code,
I would be greatful.



Cheers
Dave....