Its possible to conect 18f4550 to usb device?

[camolas]

Hi,

Thanks for caring about, i have see the ftdi chip to but im very new at all this and i do not now how to program this chips (because they sell it clean) and with what programer?

This USBwiz is a plug in and play good soluction but how do i conect it to the pic? i dont now how this work.Can you please explain me?
But it must be expensive

Thanks

[camolas]

What the experts think about this soluction for my problem? http://apple.clickandbuild.com/cnb/s...duct_info-null

Its easy to macke the code?

Thanks

[mister_e]

What the experts think about this soluction for my problem? http://apple.clickandbuild.com/cnb/s...duct_info-null

Its easy to macke the code?

Thanks

VDIP2 or VDIP1 could probably be used for that. I don't know how easy/hard/doable this will be with Nokia phone though...

[mister_e]

USBWiz can be use in SPI/I2C and with simple USART communication. Look at their FAQ

http://www.ghielectronics.com/faq.php?id=5

Pricing is fair enough ~20USD

You'll need to play a little bit with it... and read the whole set of PDF on their website... even if they're a bit badly explained (my personal opinion... i saw way better before... but worst as well) . The user manual is only 53 pages long.
http://www.ghielectronics.com/downlo...z%20Manual.pdf

[camolas]

Ok if you say its because it is sow what is the exact device from them that i have to buy? (i want 2 usb conections)
Can you leter hellp me on the code and other staff?

Thanks

p.s. ypu are Cristiano Ronaldo from pics

[mister_e]

I tend to believe that USBWiz would be the right choice. I'll suggest you to contact them directly just to make sure it can handle 2 USB devices (as they seems to say on their website)

Vinculum (VDIP2) may work too, good part... it's a plug & play module, nothing to solder, already assembled... Even here, i would suggest you to contact them to make sure it can talk with the devices you have on hand.

I could help, but it's not going to be free... Seems i still have some e-mail problems, so PM me if you're interested.

[skimask]

I could help, but it's not going to be free...

Me too! Me too!

[camolas]

Me too! Me too!

Im not a rich men ok

[camolas]

Im waiting for the ftdi part, later i will get in touch about that for now can i wired in apic to pic serial connection de Tx (from pic transmiter) to de Rx (from pic receiver) direct or ned to put some resistor?

Thanks