Thanks to both.
Mr. E, I have changed the code to:
@ __CONFIG _CONFIG4L, _LVP_OFF_4L & _STVREN_ON_4L & _XINST_ON_4L & _DEBUG_OFF_4L

AND changed the oscillator to 20 MHz:
DEFINE OSC 20

and now BOTH lines are low all the time.......

This is confounding, I am certain it will be a simple thing but I can not see it..... however, I do smell a lot of pine....... <grin>.

Again, any help no matter how critical would be appreciated. Datasheet reading have proved as helpful as the tea readings.......